outline drawing outline dimensions ( ) inch mm a b c d e f g h j k l m n p q r s t wt. 1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106 grams 30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 maximum ratings operating temperature -55c to 85c storage temperature -55c to 100c absolute max. supply voltage (vcc) 6v absolute max. tuning voltage (vtune) 7v all specifcations 50 ohm system rev. b m152326 edr-7155f2 ZX95-1012+ rav 160710 page 1 of 2 electrical specifcations coaxial voltage controlled oscillator 5v tuning for pll ic's 925 to 1012 mhz ? linear tuning characteristics ? low phase noise ? low pushing ? protected by us patent 6,790,049 features ? r & d ? lab ? instrumentation ? wireless communications ? point-to-point applications ZX95-1012+ case style: gb956 connectors model sma ZX95-1012-s+ model freq. power phase noise tuning non harmonics pulling pushing dc no. (mhz) output dbc/hz ssb at offset harmonic (dbc) pk-pk (mhz/v) operating (dbm) frequencies,khz voltage sensi- port 3 db spurious @12 dbr power range tivity cap modulation (dbc) (mhz) typ. (v) (mhz/v) (pf) bandwidth vcc current (mhz) (volts) (ma) min. max. typ. 1 10 100 1000 min. max. typ. typ. typ. typ. typ. max. typ. typ. max. ZX95-1012+ 925 1012 +4.5 -76 -104 -126 -146 0.5 5 55 40 80 -90 -24 -13 2 1.5 5 35 permanent damage may occur if any of these limits are exceeded. http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f note: when soldering the dc connections, caution must be used to avoi d overheating the dc terminals. see application note an-40-10 . ! notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
performance data & curves* page 2 of 2 *at 25 o c unless mentioned otherwise ZX95-1012+ ZX95-1012+ frequency and tuning sensitivity 800 850 900 950 1000 1050 1100 1150 012345 tuning voltage (v) frequency (mhz) 35 40 45 50 55 60 65 70 tuning sensitivity (mhz/v) freq. @ -55c freq. @ +25c freq. @ +85c t.sens @ +25c ZX95-1012+ power output 2 3 4 5 6 7 012345 tuning voltage (v) output power (dbm) -55c +25c +85c ZX95-1012+ frequency pulling & pushing (vcc 5%) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 012345 tuning voltage (v) pushing (mhz/v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 pulling (mhz) pulling pushing ZX95-1012+ phase noise vs. tuning voltage -150 -140 -130 -120 -110 -100 -90 -80 -70 012345 tuning voltage (v) phase noise (dbc/hz) 1khz 10khz 100khz 1mhz ZX95-1012+ harmonics level -70 -60 -50 -40 -30 -20 -10 0 012345 tuning voltage (v) harmonics (dbc) f2 f3 f4 ZX95-1012+ phase noise -150 -140 -130 -120 -110 -100 -90 -80 -70 1 10 100 1000 frequency offset (khz) phase noise (dbc/hz) v tune frequency power output icc harmonics (dbc) freq. freq. phase noise (dbc/hz) freq phase tune sens (mhz) (dbm) (ma) push pull at offsets offset noise at (mhz/v) (mhz/v) (mhz) (khz) 980 mhz -55 c +25 c +85 c -55 c +25 c +85 c f2 f3 f4 1khz 10khz 100khz 1mhz (dbc/hz) 0.00 66.78 833.5 824.6 814.8 4.50 4.27 3.11 23.59 -18.8 -44.4 -59.6 1.04 1.52 -74.0 -102.0 -124.9 -145.6 1.0 -77.10 0.25 60.58 849.5 841.3 832.6 4.68 4.39 3.19 23.75 -19.3 -45.4 -57.9 0.81 2.16 -75.1 -102.6 -125.1 -145.7 2.0 -85.86 0.50 56.87 864.2 856.5 848.3 4.76 4.51 3.37 23.87 -19.9 -46.5 -58.0 0.70 2.02 -73.6 -102.8 -125.3 -146.2 3.5 -93.22 0.75 55.38 878.1 870.7 863.1 4.77 4.49 3.34 23.97 -20.3 -46.2 -55.5 0.62 2.33 -74.4 -103.4 -125.6 -146.6 6.0 -99.21 1.00 54.57 891.7 884.5 877.2 4.81 4.46 3.34 24.04 -20.9 -45.1 -55.3 0.51 1.36 -73.6 -103.1 -125.9 -146.5 8.5 -102.69 1.25 53.93 905.0 898.2 891.0 4.93 4.49 3.35 24.13 -21.3 -43.5 -54.6 0.39 2.28 -75.8 -103.8 -126.1 -146.6 10.0 -104.43 1.50 54.18 918.2 911.6 904.8 5.05 4.58 3.45 24.21 -21.9 -41.7 -53.0 0.26 1.03 -75.2 -104.0 -126.4 -146.8 20.8 -111.81 1.75 54.42 931.6 925.2 918.4 5.09 4.65 3.60 24.27 -22.7 -40.7 -51.4 0.12 2.32 -75.9 -103.6 -126.6 -147.1 35.5 -116.81 2.00 54.62 945.0 938.8 932.1 5.07 4.64 3.67 24.35 -23.3 -39.9 -50.9 0.07 2.09 -75.8 -104.2 -126.7 -146.9 60.7 -121.61 2.25 54.90 958.6 952.5 945.9 5.03 4.57 3.65 24.42 -24.0 -39.2 -50.4 0.07 1.55 -74.9 -103.6 -126.6 -147.4 86.7 -125.44 2.50 54.92 972.2 966.2 959.7 5.07 4.61 3.70 24.47 -24.7 -39.7 -48.8 0.15 2.35 -76.0 -104.5 -126.7 -147.4 100.0 -126.76 2.75 55.12 985.9 979.9 973.5 5.13 4.69 3.80 24.52 -25.4 -40.2 -47.3 0.31 0.98 -77.4 -104.5 -126.2 -146.8 148.1 -130.51 3.00 55.74 999.6 993.7 987.4 5.04 4.66 3.83 24.53 -26.0 -41.2 -46.3 0.51 2.35 -76.3 -103.4 -126.2 -147.1 177.0 -132.02 3.25 55.64 1013.5 1007.6 1001.3 5.00 4.58 3.76 24.51 -26.4 -42.5 -45.9 0.75 1.05 -75.2 -103.4 -125.7 -146.2 211.6 -133.68 3.50 55.68 1027.3 1021.5 1015.4 4.97 4.56 3.74 24.49 -26.9 -44.4 -45.7 1.02 2.23 -73.9 -103.0 -125.4 -146.0 302.4 -136.92 3.75 55.52 1041.1 1035.5 1029.5 4.96 4.55 3.75 24.46 -27.6 -46.1 -45.7 1.30 1.56 -73.6 -102.6 -125.1 -146.2 361.5 -138.25 4.00 55.07 1054.8 1049.3 1043.5 4.94 4.53 3.75 24.42 -27.9 -47.6 -45.2 1.58 2.25 -74.9 -101.4 -124.6 -145.9 507.5 -141.47 4.25 55.18 1068.5 1063.1 1057.4 4.86 4.48 3.71 24.37 -28.5 -49.1 -45.0 1.88 2.27 -73.4 -101.5 -124.1 -145.3 606.7 -143.01 4.50 54.67 1082.2 1076.9 1071.3 4.71 4.35 3.62 24.30 -28.9 -49.4 -45.3 2.15 1.67 -74.5 -101.2 -124.0 -145.0 851.6 -145.94 5.00 53.51 1109.2 1104.1 1098.7 4.59 4.26 3.56 24.21 -29.8 -46.9 -45.6 2.58 0.53 -72.1 -100.8 -123.6 -144.5 1000.0 -147.06 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
